Use the John Deere X380 tractor PIN, installed engine markings and mower-deck identification together. A model name or a photograph cannot establish which service parts are fitted. Start with those records before comparing a kit, blade set or used-machine offer.
Identify the actual X380 before ordering
Record the full tractor PIN, engine model and serial, deck model and serial, and replacement-engine history. Confirm the market and the current parts application; Deere’s older references do not identify every engine now installed.
- Check actual seat adjustment, controls, guards and access dimensions.
- Read the fitted engine’s service requirements rather than assuming an oil-change system from another model.
- Identify each attachment and its mounting hardware separately from the tractor.
- Compare the intended route, obstacles, storage opening and manual operating restrictions with the actual equipment.
Read the dated X380 engine references
Deere’s November 2019 cross-reference lists LG265 for X380 serial 010001 onward, without an engine code. The September 2023 replacement-parts guide assigns LG265 to Canada and the USA, and AUC17070 elsewhere. Confirm the installed engine, market and current kit specification before ordering. A replacement engine requires its own identification.
- Engine oil filter: AM125424.
- Air-filter references: MIU12554 primary and MIU12555 secondary.
- In-line fuel filter: AM116304; spark plug: M805853.
These are September 2023 reference numbers, not a verified list of everything included in today’s LG265 package. Compare the seller’s itemized contents and the planned service before adding separate filters. The fuel-filter listing below contains two filters; that package count does not establish a service requirement.
The September 2023 guide calls UC35484 the traction-drive belt; the undated reminders name M144044. Confirm the current tractor/transmission application instead of treating a deck belt as a traction belt or assuming the numbers are interchangeable.
Equipment & supplies
Conditional X380 kit and fuel-filter choices
Use the dated X380 references to start an enquiry. Confirm the actual engine, market, current application and package contents before ordering. Buy separate filters only for the identified service task; they may duplicate a kit.
John Deere LG265 maintenance kit
The November 2019 X380 row lists LG265 from serial 010001 without an engine code; September 2023 assigns it to Canada and the USA. Confirm the fitted engine, market and current kit contents before buying; do not transfer this choice to an unidentified replacement engine.
AM116304 fuel filter
Deere’s September 2023 X380 guide names AM116304 fuel filter. Confirm its current application to the fitted engine and follow the applicable fuel-service precautions. This listing contains two filters; check kit contents and the work planned before adding it.
As an Amazon Associate I earn from qualifying purchases.
Match the X380 deck and cutting mode
- The September 2023 48-inch Accel Deep page lists UC22009 mower blades and M169500 V-belt. It does not label that belt’s role or provide a primary-belt row.
- The 54-inch page lists UC22010 mower blades, M169485 primary belt and M169486 secondary belt. UC22009 is not this page’s blade reference.
- Both pages list AM130907 deck-leveling gauge, M111489 gage wheel and M113955 roller. Use the matched manual for measurement and adjustment.
The undated 48-inch reminder names M169485 primary and M169500 secondary belts, M145476 side-discharge blade, M127673 mulch blade and BM24993 MulchControl kit. These older entries do not prove current supersession or complete mulch equipment. Confirm the actual deck and cutting configuration before selecting a blade.
Read the older X380 sheets cautiously: both kit tables say X350, and the sheet headed 54-inch labels its blade rows 48-inch. Use the dated X380 guide and a current component diagram or dealer enquiry to resolve those cells. This page does not silently correct them or supply an unverified 54-inch blade or belt offer.
Equipment & supplies
X380 blade and leveling choices after deck identification
The September 2023 X380 guide separates 48-inch and 54-inch Accel Deep references. Confirm the actual deck and current application. The blade listing here is for the documented 48-inch reference; no 54-inch blade or complete mulch-kit offer is supplied.
Accel Deep: UC22009 mower blades
The September 2023 X380 48-inch Accel Deep page names UC22009. Confirm the current deck reference before buying this three-blade listing; the older reminder uses M145476 for side discharge. This is not the documented 54-inch choice or a complete mulching system.
John Deere AM130907 deck-level gauge
Both September 2023 X380 deck pages show AM130907. Use the matched manual for preparation, measurement points and adjustment. This gauge does not identify the fitted blade, establish a universal cutting height or diagnose every uneven-cutting fault.
As an Amazon Associate I earn from qualifying purchases.
Prepare X380 service with the applicable manuals
Match the engine and tractor/deck manuals to the actual identities. Follow their intervals, oil specification, draining method and disposal instructions; do not assume a universal oil-change shortcut.
Use the fitted engine’s instructions for filter inspection, cleaning and replacement. A similar-looking filter or neighboring model name does not establish its application.
Check tire condition and specified pressures before evaluating deck level. Follow the deck manual’s shutdown, cooling, isolation, support and blade-handling precautions; do not reach into an operating deck.
Identify the installed battery and follow its instructions for testing, connections, charging and storage. A starter fault is not diagnosed by a photograph or a parts list.
Follow the applicable fuel, cleaning and seasonal-storage instructions. Before adding collection, mulch, snow or hauling equipment, verify the attachment’s own application, mounts, guards and operating limits.
Keep dates, hours, fitted part numbers and repair invoices with the machine record. If a reference disagrees with an installed part, send both identities and clear photographs to the supplier before ordering.
Record X380 condition from a permitted safe position
Inspect only where the manuals permit safe access after shutdown, cooling and isolation. A mirror or light can help record readable labels and visible concerns; neither establishes internal condition or parts compatibility.
- Check intended access and attachment clearances without assuming a safe slope or turning capability.
- Assess the actual seat, controls and operator fit; no particular suspension-seat package is established here.
- Request hours and dated service or repair records for this machine.
- List observed damage, missing guards or hardware and obtain a repair quotation.
- Ask the seller or dealer to confirm unresolved PIN, engine, deck and attachment references.
- Keep observations and documents separate from unsupported owner testimonials.
- Have each included attachment identified in writing with its mounting equipment.
Equipment & supplies
Aids for recording the actual X380 equipment
Use these optional aids only where the X380 manuals permit safe access after shutdown, cooling and isolation. Retain readable labels and visible concerns for the service enquiry. A mirror or light does not establish current fit or internal condition.
Ullman HTC-2 inspection mirror
The Ullman HTC-2 inspection mirror can help read a safely accessible X380 engine, deck or attachment marking. Keep a clear transcription or photograph and resolve uncertain characters before a parts enquiry. The mirror provides no compatibility or internal-condition verdict.
Streamlight MicroStream pocket light
The Streamlight 66318 MicroStream uses an AAA battery; it is not the USB version. Lighting can help document permitted, safely accessible X380 labels, guards or mounting hardware. A lit record does not diagnose a fault or prove a replacement part fits.
As an Amazon Associate I earn from qualifying purchases.
X380 pre-purchase and parts checklist
- Read and retain the tractor, installed engine, deck and attachment records.
- Confirm the dated reference against the current application and seller’s exact part number.
- Check package quantities and kit contents to avoid duplicate filters or incomplete attachment purchases.
- Use the applicable manuals for procedures, operating restrictions and safe access.
- Obtain written equipment, condition, repair, delivery and warranty terms before comparing total cost.
Sources and current lookup: ; ; ; ; ; .
I keep hearing about the X380’s amazing handling. How does it compare to other models? I’m considering upgrading my old tractor. 🤔
I upgraded from an old Craftsman, and it’s like night and day! Definitely worth it.
Great question, Jessica! The X380 is designed for ease of use and comfort, especially compared to older models. You might find the steering and maneuverability much improved!
I just bought the X380 and I’m already in love! 😍 The cut is so clean and it’s super easy to handle. Anyone else here have tips on maintaining it? I want it to last for years!
I’ve had mine for a year now, and I can’t believe how well it holds up. Make sure to check the air filter regularly!
Congrats on your new purchase, Sarah! For maintenance, regular oil changes and keeping the blades sharp are key. You’ll love it even more as you keep it in shape!
I’ve been using the X380 for a few months. The handling is great, but I wish it had a little more speed. Sometimes I feel like I’m just cruising! 😂
Right? It’s perfect for mowing but not for racing! 😂
Haha, I get that! It’s more about precision than speed, but there are some tweaks you can do to increase your efficiency.
Good article! I just wish they’d included more on the performance under various conditions. It’s good on grass but how about wet weather? Anyone tried it?
Great point, Ronnie! The X380 performs decently in wet conditions, but it’s best to avoid mowing when the grass is too soggy.
I’ve used mine in light rain, and it handled well, but I wouldn’t push it in heavy downpours.
I’m still deciding if I should get the X380 or another brand. Anyone feel like they’ve done a comparison? What do you think?
Choosing can be tough! The X380 has solid reviews, but it’s always good to compare specs and features with other brands.
I compared it with some Cub Cadet models, and honestly, the comfort and ease of use of the X380 won me over.
I’m on the fence about getting the X380. Is it worth the investment? I’m worried about the long-term value. 🤷♂️
That’s a valid concern, Paul! Many users report that it retains its value well, especially with proper maintenance.
I’ve had mine for two years now, and I’d say it’s worth every penny! Just keep up with the service.
The X380 has some nice features, but honestly, I expected a bit more power for the price. It’s decent, but I’ve had some hills that it struggles with. 😕
Thanks for sharing your thoughts, Tommy. It can depend on the terrain, but have you tried adjusting the speed settings? That sometimes helps!
Yea, I noticed that too! It’s okay for flat areas but can be a bit underwhelming on slopes.
The maintenance tips in this article are super helpful! I’ve been following along and my tractor is still going strong! 💪 What’s your favorite maintenance tip so far?
Totally agree, I also love the tip about checking the belts! It saved me a hassle!
Glad you found them useful, Amanda! Regular cleaning of the deck is a fan favorite. It really helps with performance!
Just got mine last week and wow, the customer service was top-notch! They really guided me through the features. 👍 Anyone else had a good experience with support?
Happy to hear that, Derek! Good customer service can make such a difference. What features are you enjoying most so far?
I had a similar experience! They were super helpful when I called about my warranty.