May 29, 2025 X500 Series Lawn Tractors

John Deere X584 Select Series Tractor

John Deere X584 lawn tractor beside yellow daylilies and a garden pavilion.
John Deere X584 lawn tractor beside yellow daylilies and a garden pavilion.

A John Deere X584 parts enquiry needs the tractor PIN, installed-engine identification and deck record. Keep those records together when comparing a used machine or ordering service parts. A model name or photograph cannot establish which components remain fitted.

Check the X584 tractor, engine and deck separately

Photograph each identification label, transcribe its characters and note the market in which the tractor was supplied. Ask about engine replacements and deck changes. If a plate is missing or the equipment differs from the manual, resolve that identity before ordering.

For attachments, check the mounting interface, required hardware and operating limits for the actual configuration. Do not transfer a capacity or compatibility statement from an X384 or another Select Series model. Measure gates, storage space and the complete machine with its fitted discharge or collection equipment.

Check dated X584 service references before buying a kit

Deere’s November 2019 maintenance-kit table lists LG265 for X584 serial numbers 110001 and later, without an engine code. The September 2023 X584 guide lists LG265 outside Europe and AUC17070 for Europe. Neither document identifies an unknown replacement engine. Confirm the current application with the installed-engine record and supplier.

The September guide names AM116304 for fuel filtration, MIU12554 foam and MIU12555 paper air-filter references, and AM125424 for engine oil filtration. Check a kit’s current contents before adding individual filters. The selected AM116304 offer contains two filters; that package quantity does not establish how many are required for one service.

Resolve the oil-filter discrepancy

The undated Deere X584 48-inch reminder names AM107423, while its 54-inch reminder and September 2023 guide name AM125424. Deck width does not identify the installed engine. Have the current engine-specific lookup resolve that discrepancy; this page does not establish interchangeability or a supersession.

The September guide separately names MIA881446 for the transaxle. An engine oil filter is not a transmission filter. Use the applicable manuals for fluids, intervals and procedures, including fuel handling and disposal.

Match the X584 deck and cutting setup

Read the deck identification and confirm the discharge, mulch or collection equipment actually installed. These references come from the September 2023 X584 guide; they require a current lookup for the particular assembly.

  • 48-inch Accel Deep: UC22009 mower blade, M169485 primary belt and M169500 secondary belt. The mulch references are M127673 and UC25185 marked as a retrofit.
  • 54-inch Accel Deep: UC22010 standard or M152726 high-lift mower blade, M169485 primary belt and M169486 secondary belt. M177791 is the mulch-blade reference.

Older undated reminders name M145476 for 48-inch standard cutting and M143520 for 54-inch side discharge. Confirm the current reference rather than treating all these numbers as interchangeable. A blade listing does not establish that a complete MulchControl or collection system is included.

Both September deck pages show the AM130907 leveling gauge. Follow the matched manual for preparation, measurement points and adjustment. A gauge reading alone cannot identify every cause of an uneven cut.

Record X584 condition from a permitted safe position

Before inspecting, shut down, allow components to cool and isolate the machine as its manuals require. Keep away from moving components and do not use an unsupported raised deck for access. Readable labels and photographs help a service enquiry; they do not replace a qualified inspection.

Record visible damage, missing guards or mounting hardware and questions about attachments. Ask the seller for hours, dated service records and repair details. Test seat and control access in a safe setting, and have unresolved faults assessed before relying on the machine for a planned job.

X584 pre-purchase and parts checklist

  • Match tractor serial, market, installed engine and deck to the applicable literature.
  • Resolve the oil-filter discrepancy and confirm the current kit contents; avoid duplicate filters.
  • Confirm deck size, cutting mode, blade reference, belt function and the seller’s quantity.
  • Obtain a written offer listing attachments, missing components, repairs, transport and warranty terms. Compare complete costs with alternatives of documented condition.

X584 manuals and source references

Find the matching manuals in the and check the installed equipment in the . The dated references used here are Deere’s and . The conflicting oil references appear in its undated and .