A G110 listing may say 19 hp or 25 hp. Check the installed engine before treating either number as the machine’s specification. Deere’s February 2004 TM2020 technical manual lists the G110 garden tractor with a Kohler CV730-0040 engine rated at 25 hp (18.6 kW), with 725 cc displacement. The Deere preview confirms the manual’s date and G100/G110 scope; the specification page in a third-party scan supplies the engine figures. This documents that edition, not the engine installed in every used G110.
Which mower decks does Deere list?
Deere’s June 2015 attachment archive lists two convertible mowers under “Current Attachments for Non-Current G110 Garden Tractors”: the 48-inch 48C (SKU21354) and 54-inch 54C (SKU21394). It also lists the 54-inch BG20304 mulch kit as fitting G110 and 190C. This establishes listed options, not a standard deck or the deck on a particular used tractor. The source article’s 42-inch choice is not established by these G110 entries.
Identify the tractor before ordering a part
- Record the tractor’s model and product identification number (PIN) from its identification plate. A listing title alone cannot establish the exact configuration.
- Read the engine model and specification label. Compare the seller’s horsepower claim with the installed engine and the applicable manual.
- Identify the fitted mower deck separately. Match its label and measured cutting width to the correct Deere parts catalog before selecting a belt, blade or mulch kit.
Use Deere’s manuals entry point for the machine’s operator instructions and a Deere parts catalog or dealer to verify fit by the recorded identifiers. If a plate is missing or unreadable, pause the parts order and ask for clear photos of the tractor, engine and deck; a parts counter can then help identify the assemblies. The 2015 archive is a historical attachment list, not a current stock or fit guarantee.
Checking a used G110
Compare the seller’s description and service receipts with the three identifiers above. With the engine stopped and the key removed, inspect the deck shell, belt path, visible leaks and damaged or altered safety parts. Ask for a demonstration of starting, forward and reverse travel, braking and mower engagement in a suitable open area, following the operator’s manual. An unusual noise, vibration or uncertain repair needs an independent inspection before purchase. Published horsepower or a deck width does not establish towing capacity, slope limits, service intervals or attachment fit for the machine in front of you.