Heavy Hitch Green 49 Inch Bucket Tooth Bar for Sub-Compact Tractor. Fits Bucket Cutting Edges Sized 1/2 or Less with No Drilling Required | Heavy Duty Design Made in USA

Availability: In Stock.

Heavy Hitch Green 49 Inch Bucket Tooth Bar for Sub-Compact Tractor. Fits Bucket Cutting Edges Sized 1/2" or Less with No Drilling Required | Heavy Duty Design Made in USA

john deere buckets

[BUILT TO LAST] Teeth are replaceable and interchangeable meaning that wear and tear doesn't mean buying a whole new tooth bar, just replace the damaged one!

[EQUIPMENT YOU CAN COUNT ON] Heavy Duty Pengo 230 shanks, 6 shanks on the 46″ and 49″ Bar | 7 shanks on the 53″, 57″ and 61″ Bar | 8 shanks on the 73″ bar

[USA MADE] Our product is manufactured in Minnesota so you know it can withstand the harshest conditions!

[GUARANTEED FIT] Our standard bucket bar is designed to work with standard material buckets that have up to a 1/2″ cutter bar and our heavy duty bucket bar works with cutter bars of more than 1/2". Check out the full product description for some applications or let us know if you have questions!

[THIS IS A STANDARD BUCKET SIZE TOOTH BAR] This tooth bar will fit on a cutting edge of 1/2″ or less. Measure the height of your cutting edge and if your cutting bar is thicker than 1/2″, you will need our Heavy Duty tooth bar. Make sure to measure the inside width of your bucket. This will determine what width you will need.

$445.99

buy on amazon

Product Features

[BUILT TO LAST] Teeth are replaceable and interchangeable meaning that wear and tear doesn't mean buying a whole new tooth bar, just replace the damaged one!
[EQUIPMENT YOU CAN COUNT ON] Heavy Duty Pengo 230 shanks, 6 shanks on the 46″ and 49″ Bar | 7 shanks on the 53″, 57″ and 61″ Bar | 8 shanks on the 73″ bar
[USA MADE] Our product is manufactured in Minnesota so you know it can withstand the harshest conditions!
[GUARANTEED FIT] Our standard bucket bar is designed to work with standard material buckets that have up to a 1/2″ cutter bar and our heavy duty bucket bar works with cutter bars of more than 1/2". Check out the full product description for some applications or let us know if you have questions!
[THIS IS A STANDARD BUCKET SIZE TOOTH BAR] This tooth bar will fit on a cutting edge of 1/2″ or less. Measure the height of your cutting edge and if your cutting bar is thicker than 1/2″, you will need our Heavy Duty tooth bar. Make sure to measure the inside width of your bucket. This will determine what width you will need.

category: john deere buckets

see more: john deere 73 bucket